Before & After

Foundation Repair Before & After Photos

Click on a photo to enlarge.

Payson, AZ Foundation Repair

The owners of this Payson, Arizona area home reached out to Arizona foundation solutions after noticing signs of a crawlspace problem. Common signs include springy floors, floors that are out of level as well as doors and windows out of square.

 

*note: before & after photos are not at the same angle. 

 

Besides Concrete stem wall repair, Arizona Foundation Solutions does concrete pool repair too, especially down Payson, Arizona.

Pine, Arizona Foundation Stabilization

The owners of this Pine, Arizona home reached out to us after seeing signs of a foundation problem, specificly stairstep cracking. 

To view the full project gallery, visit: https://www.foundationrepairsaz.com/foundation-repair-services/photo-gallery/40316-album-pine-az-underpinning.html?cache=0#ad-image-0

Pine, AZ Foundation Repair Before & After

The owners of this late 1970's single-family ranch block home reached out to us after noticing some cracks in their foundation. 

Additional symptoms included:

-          Wall Separation

-          Sticking Doors

-          Cracks in the Drywall

-          Gaps Between the Base Boards & Floor

 

At Arizona Foundation Solutions, we not only take pride in our work, but we also take care of your property.  We understand that having a foundation problem can be frustrating & do our best to make the process flow as smoothly as possible.

Foundation Repair: Settlement & Heave in Camp Verde, AZ

This 1979 brick home was displaying symptoms of a foundation issue, including windows sticking, cracks in the exterior walls, drywall cracks and both interior & exterior foundation cracks.

The production and after photos posted are of the Supportworks 238 Push Pier installation.  

Vail, AZ Concrete Crack Stitching

Composite interlocking can be performed to tie the broken pieces of the concrete together. The existing cracks will be cleaned and non-parallel lines will be cut across the existing cracks. Next carbon fiber laminate stitches will be inserted into the non-parallel cuts and then the gaps will be filled with a 2 part poly.

Finally, the crack should be ground smooth to minimize the differential. If done properly, this will allow the slab to function as one floating unit to help prevent the damages to flooring, ceiling and walls. If this is instead expansion joint separation, the joint should be cleaned, routed, and re-caulked with an expansive joint filler. 

our service area

We serve the following areas

Our Locations:

Arizona Foundation Solutions
3125 S 52nd St
Tempe, AZ 85282
1-602-883-3777
Service Area
Free Estimate